Automatic decapping centrifuge about electric centrifuge installed correctly

On automatic decapping centrifuge the other information please visit http://www.shlxj.com.cn/ for more details.
(1) supply voltage: voltage is not within the firm must conform to the +10% national standards, some manufacturers or centrifuge is not normal operation. If the voltage is not firm on this above, automatic decapping centrifuge suggested by the regulator, for compliance with this grid.
(2) wire to prison: wiring room power supply to meet the demand of. Our country is a three-phase four wire system. Three-phase three-phase industrial power in the use of three-phase power, when the zero line and the ground wire to separate, more important is whether the phase of industrial electric or single-phase electric general or the ground should be reliable, so as to avoid leakage, ground shall not be connected to the heating pipe, the water pipe.
(3) the ground to flat, robust: for large centrifuge, the device address moving floor to robust, ensure the normal operation of the centrifuge rotor, not sunken into the ground, equipment fixed position should be flat and robust.
(4) find a good level: looking for small level accurately ruler, centrifuge lid open, find the level on the spindle, automatic decapping centrifuge by adjusting the adjusting bolt around 4 caster wheels drive to find good level, note the 1 foot cannot defeat.