Several possibilities about Shanghai centrifuge automatic parking

About Shanghai centrifuge the other information please visit http://www.shlxj.com.cn/ for more details.
Shanghai centrifuge active when parking, on the device itself and all the equipment system damage is great, there may be some important equipment damage, so, in Shanghai's centrifuge suggestions on centrifuge nonhuman caution required for parking representation. Maybe the reason of the following 3 points.
1 electrical faults. Such as discriminant for this situation, need to be agile contact electrical repair personnel, the electrical some check processing.
The 2 slurry volume overload causes torque arm controller for active disengaged from the active protection work, perhaps forming centrifuge parking. Shanghai centrifuge to understand when user needs by hands in a clockwise rolling torque arm, without stopping, then close the torque arm, head driving, and adjust the feed quantity; if you have to stop, then remove the small end cover, water wash drum, and before and after rolling belt, drum not accumulate until acknowledged the sensitive material of rolling, can start from the drive. Can also according to the survey site condition feed centrifuge is blocking materials. If congestion is severe, can make the equipment load is too large, it may form a centrifuge active parking. Then it is necessary to immediately organize the feed inlet, remove buildup, together with the finishing drum, admit now clean before it can start from the drive.
3 for other reasons, such as motor overtemperature make thermal protector tripping, also may form centrifuge parking. Shanghai centrifuge proposal then demand timely contact repair personnel processing.