Several possibilities for high speed refrigerated centrifuge | centrifuge automatic parking

On high speed refrigerated centrifuge the other information please visit http://www.shlxj.com.cn/ for more details.
High speed refrigerated centrifuge on centrifuge automatic parking, the equipment itself and the entire installation system of great harm, there may be some important equipment damage, therefore, high speed refrigerated centrifuge suggestions on centrifuge nonhuman think carefully for parking phenomenon. The reason may form the following 3 points.
1 electrical faults. Such as discriminant for this situation, need to quickly contact electrical repair personnel, high speed refrigerated centrifuge suggested the local implementation of inspection and disposal of electrical.
The 2 slurry volume overload causes torque arm controller automatically disengages from the automatic maintenance work, may form a centrifuge parking. When the user needs by hands in a clockwise rotation torque arm of force, if there is no obstacle, then close the torque arm, restart, and adjusting the feeding amount; if there are obstacles, then remove the small end cover, water washing drum, and turn back and forth until it is confirmed in the rotary drum belt, no material deposit rotation sensitivity after the party can restart. High speed refrigerated centrifuge learned can also be materials according to the site condition infarction feed can inspect the centrifuge. If the infarction serious, will make the equipment load is too large, is likely to form a centrifuge automatic parking. We must immediately liquidation under the discharge port, remove the accumulated material, at the same time clearing drum, confirmed to have clean front can restart.
3 for other reasons, such as motor overtemperature make thermal protector tripping, may also form a centrifuge parking. When demand timely contact maintenance personnel disposal.
.